Setting The Clock; Radio Operation; Cd-Player Operation - oneConcept 10006663 Mode D'emploi

Masquer les pouces Voir aussi pour 10006663:

Mode d'emploi (26 pages)

Mode d'emploi (112 pages)

Table Des Matières

Table des Matières

Les langues disponibles

1. Under stand-by status, hold TIME button, the time display will flsh.

2. Press VOLUME -/HOUR and VOLUME +/MINUTE button to adjust the time.

1. To turn the radio on, press the STAND-BY BUTTON once. The LCD DISPLAY lights up.

2. Press MODE BUTTON to choose the „RADIO" mode.

3. Press AM/FM BUTTON to choose AM or FM.

4. Press TUNING+ and TUNING- to choose your desired station. The radio frequency ap-

pears in the LCD DISPLAY. Adjust the sound level by pressing the VOLUME buttons (+/-).

5. To turn off the radio, press the STAND-BY BUTTON again. The LCD DISPLAY will go "off".

• AutoScan: under radio status, press SCAN button to scan the stations.

• Memery station: under radio status, press MEMERY button, the dispaly will flash. Press

Preset + or Preset- to choose the memery position.

• Imput the radio station frequency: Hold REPEAT/PROG button for two second, the

display will be cleared, use remote control to imput the radio station frequency.

PLAY MODE

1. Turn on the Music System by pressing the STAND-BY BUTTON. The LCD DISPLAY goes "On".

2. Press MODE button to choose the CD mode.

3. Open the CD DOOR by pressing the CD DOOR at the "OPEN/CLOSE" mark located on the

CD door, load a CD with the label side facing upward and then close the CD door.

4. Playback will start from track 1 once the Player has finished reading the TOC. The PLAY

INDICATOR will appear steadily on the LCD DISPLAY.

5. While playing, press the PLAY/PAUSE

flash. Press the PLAY/PAUSE

6. Adjust the VOLUME BUTTONS (+/-) to the desired volume level.