Safety Instructions - PAXXO PACTO SAFE 4.0 Manuel D'instructions

2. Safety instructions

For safe use of the Pactosafe, the following instructions must be followed:
Before using the machine the Operator must have undergone training and have read
and understood the manual and its instructions. It´s important with the training to avoid
danger and injury. If the equipment is used in a manner not specified by the
manufacturer, as indicated in this manual, protection provided by the equipment, this
manual, and accessories may be impaired.
The Pactosafe 540WS (stationary version) must be connected to an earthed wall
socket and a maximum length of powercord 10 feet/3 meter.
The powercord may only be connected to an easy reached mains socket. Nothing is
ollowed to hide the mains socket for Pactosafe
When plugging and unplugging the unit from the mains socket, it is important to only
pull the plug and not the cable.
Statement of signs :
Symbol A Symbol B Symbol C Symbol D Symbol E
Symbol A :
Attention! Read the operators manual end statement of signs.
Symbol B :
Keep fingers and hands clear of the funnel when the welding bars are closing. Long
hair or jewels may cause injury.
Symbol C :
Caution, hot surface can occur during, or after, welding of material
Symbol D :
Warning, biohazard
Symbol E :
It´s prohibited to put metal parts or medical instruments in the Pactosafe.
The waste must have passed the welding bars before they close.
The Pactosafe machine may not be used in operating rooms (OP) of hospitals! The
machine can be used in patient rooms of hospitals, if the machine is placed at least 1,5
m away from the patients. The machine may not be left unattended.
The user must show due regard to the environment when handling residual products by
avoiding the release of hazardous substances and/or must adhere to local, national or
international regulations.
The machines must not be used with any sharps or syringes.
Paxxo AB / Bjurögatan 35, SE-211 24 Malmö, Sweden / Tel: +4640186025/ Fax: +4640183736 / www.paxxo.com
9