Step 2: Safety And Conformance Information - pico Technology PicoScope 2000 Serie Manuel D'utilisation

PicoScope 2000 Series Oscilloscopes and MSOs
device until the installation is complete.
4. You can try out the software with a demo device now, by clicking the new PicoScope icon on
your desktop.
For more information on the software, refer to the A to Z of PC Oscilloscopes at
picotech.com/library/a-to-z
picotech.com/library/documentation

Step 2: Safety and conformance information

To prevent possible electrical shock, fire, personal injury, or damage to the product, carefully
read this safety information before attempting to install or use the product. In addition, follow all
generally accepted safety practices and procedures for working with and near electricity.
The product has been designed and tested in accordance with the harmonized standard
publication EN 61010‑1:2010+A1:2019 (Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use), and EN 61010‑2‑030: 2010 (Requirements for Testing
and Measuring Circuits). The product left the factory in a safe condition.
The following safety descriptions are found throughout this guide:
A WARNING identifies conditions or practices that could result in injury or death.
A CAUTION identifies conditions or practices that could result in damage to the product or
equipment to which it is connected.
2.1 Symbols
These symbols may appear on the product or in this guide.
Symbols
Chassis terminal
Possibility of electric shock
Caution
Do not dispose of this product as unsorted municipal waste
Appearance on the product indicates a need to read the supplied safety and operating instructions.
[1]
This oscilloscope is intended for the measurement of electrical signals up to the limits specified in
this guide and in the PicoScope 2000 Series Data Sheet. For safe limits of accessories, please refer
to the documentation supplied by the manufacturer.
To prevent injury or death use the product only as instructed. Protection provided by the product
may be impaired if used in a manner not specified by the manufacturer.
2 Copyright © 2006–2022 Pico Technology Ltd. All rights reserved.
or the software User's Guide, which you can download from
or access from the Help menu within the software.
[1]
Description
WARNING
User's Guide
DO231-11