Assembly Of The Device - FUXTEC FX-FSR162 Mode D'emploi Original

27.

Assembly of the device

■ Assembly of the frame
5. Put the handle into the intended holder and fix it with the shown clamp and the corresponding
wing screw.
6. Fasten the handle with the appropriate screw (1) and nut (2)
7. Remove the covers
8. Mount the wheels on both sides by attaching the illustrated parts in the following order:
Tire (2) - nut (1). Then tighten the nut (1).
Original Bedienungsanleitung FUXTEC FX-FSR162_de_en_fr_ita_rev01
42