Bellcome advanced Manuel De L'utilisateur page 29

3 ACCES
After the command, the lock is unblocked for 1...10 sec. for the access of the
visitors.
// You cannot grant access without having a prior communication.
Communication
4 AUX COMMAND
No matter what the state of the terminal is: monitoring, call or communication,
this key may action an automation connected to the system: auto access or
garage gate, lighting system etc.
7.3 Use of the outdoor panel
1 STAND-BY
The keys of the outdoor panel and the inhabitants' names are permanently backlit.
Kurt König
2 CALL AND COMMUNICATION
Ludwing Wolf
Call duration: maximum 1 min.
Call duration: maximum 1 min.
Touch the
The call to the inhabitant is signaled acoustically.You may end the call by pressing
again the
If access is granted, the panel emits an acoustic signal, and the lock remains
unblocked for maximum 10 seconds. If the inhabitant does not answer, after a
minute, the panel returns to stand-by mode.
8 MAINTENANCE
The outdoor panels must be kept away from corrosive substances, lime or mechanical shocks.
The terminals must be kept away from water, or any other liquids, mechanical shocks, fumes,
dusts etc.
The components of the system can be cleaned with a piece of soft, cotton cloth.
The optional accumulator connected with the supply control unit will be replaced after the
expiry of its life span. The supply control unit ensures the accumulator's charging, as long as
the accumulator is not defect. The state of the accumulator is indicated by the signals of the
LED S1 and the acoustic warning in case of a defect.
ACCESS and
END COMMUNICATION!
AUXILIARY COMMAND
key (related to the inhabitant).
key. If the inhabitant answers, communication is initiated.