Bluetooth Connection; Speaker Output - CABASSE ABYSS Notice Utilisateur

ENGLISH

BLUETOOTH CONNECTION

1. Once the speaker is on, press the "Pairing" button on the back
2. The "Pairing" LED on the back should flash
3. Activate Bluetooth on your mobile
4. Select "ABYSS" from the list of available devices
5. Once the connection is successful, the LED "Pairing" on the
back stops flashing

SPEAKER OUTPUT

Min 4 Ohms
WIRE CONNECTION (LAN) TO
THE ETHERNET NETWORK
The wired Ethernet connection guarantees an optimum
and constant transfer rate in any environment. Use this
if Wi-Fi mode operation shows untimely cuts or stops of
music, signs of a saturated Wi-Fi network, or too much
router-to-stream distance.
Connect an RJ45 cable between the speaker and your
router (or Box Internet).
The connection is established when the STATUS diode
changes to solid blue. The WIFI connection is then
automatically disabled.
CAUTION: DHCP mode of the router must be enabled.
31