Thank you for purchasing a Cabasse device. We recommend you read this leaflet carefully to take
full advantage of the product.
SAFETY INSTRUCTIONS
Explanation of symbols
Lightning within an equilateral triangle
warns of the existence of dangerous,
uninsulated high voltage inside the product
enclosure, of sufficient value to present a risk
of electric shock.
The exclamation point in an equilate-
ral triangle warned of the existence of
instructions usage and maintenance in the
documentation attached to this product.
Cleaning -
Unplug the unit before clea-
ning. Do not use cleaning solutions in liquid
or aerosol form. Use preferably a damp cloth.
Installation
on
stands -
Do not place this unit on an uns-
table stand, such as stands, tripods, tables,
shelves, etc. It could fall and cause serious
injury to a child or adult who is nearby.
Ventilation -
The appliance must be po-
sitioned so that it does not interfere with its
own ventilation. For example, it should not
be installed on a bed, sofa, blanket or similar
surfaces that could block its vents. It should
not be embedded in confined spaces such as
narrow shelves or furniture that could limit
the amount of air available to the air intakes.
Power supply -
be connected to a power source of the type
written in the user manual or in line with
the product. If you are unsure of the type
of power supplied to your location, contact
your dealer or the local power company.
Electrical
Overloads
overload
power
sion cords, or power reminders. This
could result in fire or electrocution.
furniture
The appliance must only
-
Do
outlets,
exten-
Foreign bodies and liquids -
should be taken never to let foreign objects
or liquids enter the unit. They could cause
fires or electrocutions. Never pour liquid of
any kind into the device.
Maintenance -
you must unplug your appliance and have it
checked by a qualified technician:
the power supply or plug has been damaged.
foreign bodies or liquid have entered the de-
vice.
the unit has been exposed to rain or has been
sprayed with water.
and
the unit does not seem to be working pro-
perly while you are using it as part of its nor-
mal operating instructions.
Only handle the controls covered by the user
manual. Any other procedure could damage
it and require the intervention of a qualified
technician.
the unit has fallen or its bodywork is da-
maged.
the device shows significantly changed per-
formance.
In a disturbed area environment (thunders-
torm etc ...), the product may sometimes re-
quire shutdown and restart by means of the
ON / OFF power switch located on the rear
panel of the device to work properly again.
Spare parts -
of spare parts, make sure that the technician
not
has used the references recommended by
the manufacturer or having the same cha-
racteristics as the original parts. Non-confor-
- In the following cases,
If the repair required the use
Care
24