Troubleshooting; Information Codes; Check These Points If Your Dryer - Kenmore 592-89107 Serie Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

First try the solutions suggested here and possibly avoid the cost of a service call...

Information Codes

Dryer displaying code message
■ "tS", "tO" - Clogged Lint Screen. Vent is restricted.
Clean the screen or vent.
If the problem continues call for service.
■ "dO" - Door is not closed properly to run the dryer.
Close the door and then restart.
If the problem continues call for service.
■ "dF" - Door is not closing properly.
Call for service.
■ "bE" - Button stuck for more than 75 secs.
Make sure a button is NOT being pressed continuously. Try
restarting the cycle.
If the problem continues call for service.
■ "oD" - Invalid Dry time.
Call for service.
■ "hE" - Invalid heating Temp when running the dryer.
Call for service.
■ "Et" - EEPROM is not communicating properly.
Try restarting the cycle.
If the problem continues call for service.
■ "FE" - Invalid power source Frequency.
Try restarting the cycle.
If the problem continues call for service.
Kenmore_Dryer-Good-02687A-01_EN.indd 21
All manuals and user guides at all-guides.com

TROUBLESHOOTING

■ Be sure the door is latched shut.
■ Be sure the power cord is plugged into a live electrical outlet.
■ Check the home's circuit breaker and fuses.
■ Press the Start/Pause button again if the door is opened
■ Check the home's circuit breaker and fuses.
■ Select a heat setting other than Air Fluff.
■ On a gas dryer, check that the gas supply is on.
■ Clean the lint filter and exhaust duct.
■ Dryer may have moved into the cool-down phase of the
■ Check all of the above, plus...
■ Be sure the exhaust hood outside the home can open and
■ Check exhaust system for lint buildup. Ducting should be
■ Use a 4" rigid metal exhaust duct.
■ Do not overload. 1 wash load = 1 dryer load.
■ Sort heavy items from lightweight items.
■ Large, bulky items like blankets or comforters may require
■ Check that the washer is draining properly to extract
■ Load may be too small to tumble properly. Add a few towels.
■ Check the load for objects such as coins, loose buttons,
■ It is normal to hear the dryer gas valve or heating element
■ Be sure the Dryer is leveled properly as outlined in the
■ It is normal for the Dryer to hum from the high velocity of air

Check these points if your dryer...

Doesn't run.
during the cycle.
Doesn't heat.
cycle.
Doesn't dry.
close freely.
inspected and cleaned annually.
repositioning to ensure even drying.
adequate water from the load.
Is noisy.
nails, etc. Remove promptly.
cycle on and off during the drying cycle.
installation instruction.
moving through the dryer drum and exhaust system.
21
2009-07-02 ¿ÀÈÄ 3:21:28

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

592-89117 serie592-89108 serie592-89118 serie592-89102 serie

Table des Matières