Kenmore 592-89107 Serie Guide D'utilisation Et D'entretien page 16

Time Selection Button
When using Manual Dry cycles, time can be adjusted by
pressing the time selection button.
During the Sensory Dry cycle, the time light indicator is off
because exact drying times are determined by fluctuating
humidity levels.
Signal Selection Button
When the cycle is complete, a chime will sound.
When the Wrinkle Guard option is selected, the chime will sound
intermittently.
Adjust the volume of the chime or turn it off by pressing the
Signal button.
Press the button repeatedly to scroll through the choices.
Wrinkle Guard Selection Button
Wrinkle Guard provides approximately 60 minutes for models
592-891020 & 592-891070 & 592-891080, and 90 minutes for
models 592-891170 & 592-891180 of intermittent tumbling in
unheated air at the end of the cycle to reduce wrinkling. Press
the Wrinkle Guard button to activate this feature.
The indicator light above the pad will illuminate when Wrinkle
Guard is selected.
The load is dry, and can be removed at any time during the
Wrinkle Guard cycle.
Adjust Time
Time can be added or subtracted from the automatically set
times in the Manual Dry cycles (Time Dry, Delicates, Wrinkle
Release, or Air Fluff cycles).
To add or subtract time from the cycle, press the Adjust Time
arrow pad up or down until the desired time is displayed.
16
Kenmore_Dryer-Good-02687A-01_EN.indd 16
All manuals and user guides at all-guides.com
Start/Pause selection Button
Press to pause and restart programs.
Power button
Press once to turn your Dryer on, press again to turn it off.
If your dryer is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.
Child Lock
A function to prevent children from playing with your dryer.
Setting/Releasing
If you want to set or release the Child Lock, press both the Time
and Signal buttons simultaneously for 3 seconds.
How to Set:
1. It can be set while your dryer is running.
2. Once you set the Child Lock function, no button, except for
the Power button, will respond until you release the Child
Lock function.
3. The Child Lock indicator will be lit.
NOTES:
1. If the dryer is powered on again, the Child Lock function
stays on.
2. To release that function, follow the instructions above.
NOTE: When other buttons, except for the Power button, do not
respond, check the Child Lock indicator.
2009-07-02 ¿ÀÈÄ 3:21:27