Haws 7460BT Mode D'emploi

QUALITY CONTROL
Eye/face wash and valve assembly is pre-built and fully water/pressure
tested to ensure no leaks and proper function which ultimately reduces
installation time and gives the end contractor an added peace of mind.
Unit also ships with pre-assembled cast-aluminum wall bracket
to assist in the installation process.
BOWL
The 11» (27.9 cm) round stainless steel receptor is supplied with a No.
2L bright finish on its exterior
TRAP
1-1/2» IPS chrome-plated brass trap with tailpiece allow for the
emergency equipment to meet desired requirements for wall mounting.
STRAINERS/FILTERS
Chrome-plated brass in-line 50 x 50 mesh water strainer prevents
debris from reaching the eyewash so the unit stays functioning at its
best. Strainer is easily serviceable.
EYE/FACE WASH
AXION® MSR eye/face wash head uses an inverted directional laminar
flow to sweep contaminants away from the vulnerable nasal cavity.
Scald Protect Bleed Valve: Model SP157A, stainless steel scald
protection bleed valve. Automatic thermal actuator bleed valve opens
when internal water temperature reaches 98° F (36.7° C) and closes at
95° F (35° C).
Thermostatic Mixing Valve: Model 9201EW AXION® Emergency Tempe-
ring Valve thermostatically mixes hot and cold water to provide a safe
fluid supply for a single emergency eye/face wash, with a flow rate of 10
gpm (38.8 L).
Emergency Alarm System : Model 9001.5, 1/2» 120 VAC emergency
alarm and light system. Buzzer and flashing light are activated by a 1/2»
IPS double pole, double throw flow switch.
Dust Cover: Model 9102 is a stainless steel cover that protects the
eyewash heads as well as the bowl. (Picture shows cover mounted to an
eyewash.)
FEATURES & BENEFITS
OPTIONS
DISCLAIMER: Continued product improvements make specifications subject to change without notice.
Retrouvez les produits Haws et Comimex sur www.anox.fr
7460BT / 7360BT
Modèle
Laveur d'yeux ou de visage mural
Model 7460BT wall mounted eye/face wash shall include a stainless
steel 11» (27.9 cm) round bowl, an AXION® MSR eye/face wash head
shall feature inverted directional laminar flow which achieves Zero
Vertical Velocity» supplied by an integral 3.7 gpm flow control,
chrome-plated brass stay-open ball valve equipped with stainless steel
ball and stem, and chrome-plated brass in-line 50 x 50 mesh water
strainer. Unit shall also include cast-aluminum chromate protected wall
bracket, drain trap and tailpiece, yellow plastic pop-off dust cover for
eyewash head, tailpiece and trap, universal sign, 1/2» NPT inlet, and
1-1/2» NPT waste.
Where the eyes and face of any person may be exposed to injurious or
corrosive materials, suitable facilities for quick flushing of the eyes and
face must be provided within the work area for immediate emergency
use. Emergency eye/face wash facilities shall be in unobstructed and
accessible locations that require no more than 10 seconds for the
injured person to reach. Model 7360BT-7460BT is certified by CSA to
meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower
Equipment.
SPECIFICATIONS
APPLICATIONS
ANOX
®
Diffusion
Paris - France
22 July, 2020