Selecting The Temperature; Steam Ironing - KING MaxiSteam P 733 Mode D'emploi

2.Before using the iron for the first time , remove the plastic protector from the base (if it
has one) clean the base with a soft cloth.
3.Keep the base very smooth. Do not run it over metal objects (such as against the
ironing board, buttons , zips ,etc.)
4.Pure wool fibres (100% wool)can be ironed with the appliance in the steam position by
preference ,select a high steam position and use a dry ironing cloth.

Selecting the temperature

1.Check the ironing instructions on the garment to be ironed.
2.If the garment does not have any ironing instructions but you know the kind of fabric in
question, use the chart below.
3.Fabrics that have some kind of finish(polishing . wrinkles , contrasts....)can be ironed
at the lowest temperatures.
4.If the fabric contains several kinds of fibres ,always select the temperature applicable
if an article contains 60% polyester and 40% cotton ,you must always choose the
temperature corresponding to polyester and without steam.
5.First classify the articles to be ironed according to the most suitable ironing
temperature : wool with wool, cotton with cotton, etc. as the iron heats up as fast as it
cools , start by ironing the articles requiring the lowest temperature such as those made
of synthetic fibres . Progress towards those that require the highest temperatures.
6.Turn the temperature control until it is in front of the appropriate signal according to the
following:
· position for nylon and acetate
·· position for wool ,silk or mixures
··· position for cotton or linen (steam).
How to fill the water tank.
1.Unplug the iron.
1.Set the steam ruler to dry ironing .
2.Fill the tank through the filling hole.
3.If you have hard water ,it is advisable to use only distilled or demineralized water.
-do not use chemically de-limed water or perfumed
4.Do not store the iron with water in the tank.

Steam ironing

1.Fill the iron as described in the section "how to fill the water tank".
2.Plug the iron into the mains.
3.Steam ironing is only possible when the highest temperatures shown on the tempera