PrimeCables CAB-CAP110 Mode D'emploi page 3

IMPORTANT SAFETY INSTRUCTIONS
5. Store idle inflators out of reach of children and other untrained persons. Inflators are dangerous
in the hands of untrained users.
6. Check for misalignment or binding of moving parts, breakage of parts, and any other condition
that may affect the inflator's operation. If damaged, have the inflator serviced before using. Many
accidents are caused by poorly maintained tools.
7. Use only accessories that are recommended by the manufacturer for your model. Accessories
that may be suitable for one inflator may create a risk of injury when used on another inflator.
8. Keep the inflator and its handle dry, clean and free from oil and grease. Always use a clean cloth
when cleaning. Never use brake fluids, gasoline, petroleum- based products, or any strong solvents
to clean your inflator. Following this rule will reduce the risk of loss of control and deterioration of the
enclosure plastic.
9. Never point any inflator toward yourself or others.
10. Keep the exterior of the inflator dry, clean, and free from oil and grease. Always use a clean cloth
when cleaning. Never use brake fluids, gasoline, petroleum- based products, or any strong solvents
to clean the unit. Following this rule will reduce the risk of deterioration of the enclosure plastic.
11. Do not exceed the pressure rating of any component in the system.
12. Protect material lines and air lines from damage or puncture. Keep hose and power cord away
from sharp objects, chemical spills, oil, solvents, and wet floors.
SERVICE
1. Inflator service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel may result in a risk of injury.
2. When servicing an inflator, use only identical replace- ment parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance
instructions may create a risk of shock or injury.
SAFETY PRECAUTIONS FOR INFLATOR
1. Know your inflator. Read operator's manual carefully. Learn its applications and limitations, as well
as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric
shock, fire, or serious injury.
2. Risk of bursting. Do not operate inflator to result in output pressure greater than marked maximum
pressure of item to be inflated. Do not use at pressure greater than 6.8 Bar.
3. To reduce the risk of electric shock, do not expose to rain. Store indoors.
4. Inspect unit for cracks, pin holes, or other imperfections that could cause inflator to become
unsafe. Never cut or drill holes in the inflator.
5. Make sure the hose is free of obstructions or snags. Entangled or snarled hoses can cause loss
of balance or footing and may become damaged.
6. Use the inflator only for its intended use. Do not alter or modify the unit from the original design or
function.
7. Always be aware that misuse and improper handling of this inflator can cause injury to
yourself and others.
8. Never leave an inflator unattended with the air hose attached to the item being inflated.
9. Do not continue to use an inflator or hose that leaks air or does not function properly.
10. Always disconnect the air supply and power supply before making adjustments, servicing an
inflator, or when an inflator is not in use.
11. Do not attempt to pull or carry the inflator by the hoses.
12. Always follow all safety rules recommended by the manufacturer of your inflator, in addition
to all safety rules for the inflator. Following this rule will reduce the risk of serious personal injury.
13. Household use only.
14. Do not use inflator as a breathing device.
3