List Of Components - Inglesina Caboto 1.2.3 iFix Manuel D'instructions

system and are essential for safety purposes.
• Do not use adapters other than those supplied with the product
or in any case non approved by the Manufacturer for the specific
usage group.
• The child car seat must be installed in strict compliance with the
instructions provided. Failure to observe instructions/warnings can
seriously compromise your child's safety.
• During your journey, refrain from leaving unattended objects or

LIST OF COMPONENTS

1 Adjustable headrest
2 Side parts
3 Side absorbers
4 Top Tether hook
5 Isofix connectors
6 Headrest adjustment lever
7 Upper belt guide
8 Safety harness
9 Harness central buckle
10 Harness release button
11 Harness tensioning strap
12 Child seat inclination adjustment lever
16
INSTRUCTIONS
bags in the car: make sure that they are stored securely as, in the
event of an accident, they can cause injury.
• If you have any queries please contact:
L'INGLESINA BABY S.P.A.
Via Lago Maggiore, 22/26 36077 Altavilla Vicentina (VI) Italy
inglesina.com
13 Manual storage compartment
14 Lower belt guide
15 Isofix connector's disengagement lever
16 Top Tether housing
17 Isofix connector adjustment lever
18 Isofix connector display window
INSTALLATION OF CHILD CAR SEAT IN THE VEHICLE
FROM 9 KG TO 18 KG
2. Slide the Isofix anchors (5) to their maximum length by turning
the lever (17). Do this on both sides of the child car seat.
Open the cover (16) and take the top tether connector out (4).
3. Connect the Isofix anchors (5) until you hear them click into