Onkyo UP-HT1 Manuel D'instructions page 17

Setting the Blend Mode
HD Radio transmissions contain analog and digital
signals. If available, the digital signal is used auto-
matically. In areas with poor reception, you may
want to choose the analog signal.
1.
Press [ENTER] repeatedly to select Auto
or Analog.
Auto: Select to use the digital signal when avail-
able.
Anlg (Analog): Select to use the analog signal.
Note:
Multicast channels 2 through 8 are digital
only, so you must select multicast channel #1 before
you can change the Blend mode.
Displaying HD Radio Information
Press the [DISPLAY] button repeatedly to cycle
through the available information.
Station name
Station name &
HD Radio chan-
nel number
HD channel, Artist name, and Song title are dis-
played in the 2nd line if the connected product has a
two-line display.
Frequency &
Preset channel
number
Station
information
Preset channel number
HD Radio
channel number
Indicates HD
Radio reception
Preset channel
Frequency
number
Scrolling
station information
En-
17