Publicité
4
1)
Place the wall plate against the wall and align it with the pilot hole.
2)
Insert one (1) 5/16" x 3" lag bolt and one (1) 5/16" washer into the
up per right mounting hole and tighten using a socket wrench and 1/2" socket.
Do not overtighten the lag bolt.
Éviter de trop serrer le tirefond.
5
1)
Level the wall plate.
2)
Use a pencil to mark the remaining three (3) mounting locations along the
Center of each wall stud.
6
Two people are recommended for this step; one person to level the wall
plate and another person to drill the pilot holes.
Il est recommandé deux personnes pour cette étape : une per-
sonne pour niveler la sablière et une autre personne pour percer
le forage de guidage.
Drill a "pilot hole" in the center of each of the marks with a power drill and a 1/4"
drill bit.
Only use 1/4" drill bit when drilling the pilot holes.
N'utiliser qu'un foret de 1/4" lors du forage de guidage.
7
1)
Insert one (1) 5/16" x 3" lag bolt and one (1) 5/16" washer into each pilot hole.
2)
Tighten all lag bolts using a socket wrench and 1/2" socket.
Do not overtighten the lag bolts when attaching the mount to the wall. Improper
Installation may result in personal injury or property damage.
Éviter de trop serrer les tirefonds lors de la fixation du support au
mur. Une installation incorrecte peut entraîner des blessures ou
des dommages matériels.
P4263F
Installation Guide
Page 5
Publicité
