General Operations; Power Management Function - iDance XD 200 Manuel De L'utilisateur

GENERAL OPERATIONS

Power Adapter Connection
Rear of Main Unit
Connect the included adapter to main unit and plug the supplied adapter into standard AC wall
socket. Press the STD BY button to turn on power. Hold the button
standby mode.
Notes:
If the adapter does not fit properly, turn it over and again. Do not force AC plug.
Remove the power adapter when the unit not operation or unused for long periods of the time.
Connecting Bluetooth to your Smartphone I Tablet
Press the STD BY button to turn on, hold the PAIRING button to connect your external Bluetooth device.
On your smartphone / Tablet, turn on Bluetooth and enable device scanning.
When XD200 is showed on the Bluetooth device list, select it to connect.
When both devices are successfully connected, you are ready to play music wirelessly from your device.
Press the PLAY button to start music playback.
Press PREV/NEXT of external Bluetooth device to switch between music tracks.
Hold the PAIRING button to reconnect other Bluetooth device.

Power Management Function:

Unit will automatically go to standby mode after 15 minutes without sound output or operation.
To resume operation, simply press the STD BY button to turn on unit
E7
AC 100~240V 50/60Hz
again turn unit to
STD BY