Descaling the tank:
According to the quality of the water used, a limescale deposit can build up on the bottom of the heating chamber
over time. You should regularly descale your bottle warmer by pouring a mixture of 100 ml of hot water + 100 ml of
white vinegar into the heating chamber.
Leave this to act for approximately 30 minutes before emptying the chamber and wipe with a damp cloth.
Do not use detergent to clean the unit.
Sterilizing Instructions
1. Place the bottle warmer on a flat surface where it is out of reach of children and it will not be knocked
or moved during operation. Before placing items in the appliance it is important that the bottle is empty,
cleaned and fully rinsed in fresh water.
2. Remove the bottle tray.
3. Pour 50ml of water into the heating chamber by using the measuring cup. You can then place the cup
back to the holder.
4. Place the empty milk bottle upside down on the heating chamber.
5. Place the steam cover securely on the unit ensuring that the 2 wings of steam cover fits snugly onto the
slots of the unit.
6. Plug the power cord into wall outlet.
7. Press the ON button to begin the sterilization cycle. The indicator light illuminates in red color.
CAUTION!
The steam given off during the sterilization cycle is very hot. Keep your hand off the appliance
when operation.
8. When the sterilization cycle finished, the bottle warmer will finished automatically. At the same time,
there will be a "beeping" sound to remind you the bottle is done.
9. You can then remove the steam cover, taking care to allow the milk bottle to cool for a moment.
Then you can take out the bottle
10. You can then unplug the unit.
Battery & product disposal information
Remember to dispose of the product responsibly.
Do not mix products bearing the crossed out bin symbol with your general household waste.
For the correct collection and treatment of these products take them to the collection
points designated by your local authority. Alternatively contact the retailer who sold you the product.
12