miniland baby warmy plus Mode D'emploi page 11

OPERATING INSTRUCTIONS:
For using at home:
1- Place the Bottle Warmer on a flat and stable surface. Be sure the warmer and the cord are out of the reach of children.
2- Plug the power cord into wall outlet.
3- Fill the measuring cup with water, following the instructions shown above, then pour the water into the heating
chamber. Your can then place the cup back to the holder.
4- Place the bottle tray into the heating chamber.
5- Place the bottle into the bottle tray. If you are using standard/small bottle, place the adaptor ring around the bottle
for better warming result.
6- For warming baby food jar, remove the lid and place the jar in the Food Jar Tray and then put into the heating
chamber.
Please note the bottle tray should be placed inside the heating chamber first.
7- Press the ON button to start warming cycle. The indicator light illuminates in red color. CAUTION! The steam given
off during the warming cycle is very hot. Keeps your hand off the appliance when operation.
8- When the heating cycle finished, bottle warmer will switch off automatically. At the same time, there will be a
"beeping" sound to remind you the bottle is done.
9- Then you can take out the bottle. For baby food jar, use the handle of Food Jar Tray to take it out.
10- You can then unplug the unit.
For using in car:
1- Stop the car / vehicle and keep the engine running.
2- Place the Bottle Warmer on a flat and stable surface inside your car and vehicle. Connect the Car Adaptor Plug on to
the power cord of the bottle warmer.
3- Plug the Car Adaptor Plug into the cigarette socket.
4- Fill the measuring cup with water, following the instructions shown above, then pour the water into the heating
chamber. Your can then place the cup back to the holder.
Warning:
For bottle: tighten the ring and shake well to mix up the contents. Pour a few drops of liquid on the back of your hand
to check the temperature before feeding.
For baby food jar: stir the contents and check the temperature before feeding.
Make sure that the appliance is cool before cleaning it or storage.
Cleaning the bottle warmer:
· Always unplug the appliance and wait until it is cool before cleaning it.
· Use a damp cloth to clean the inside and outside of the unit.
· Never immerse the unit in water for washing.
· Do not use abrasive products to clean.
· Adapter ring, trays and measuring cup can be washed using a sponge with soap and water or can be cleaned in the
dishwasher in the top tray.
11