POWER
Intended use
Only use the device for the purpose which it was designed and built for. Any other
use is not considered to be the intended use!
This device may only be used for the following purpose:
· Carbon monoxide detection in private households
If there is any question as to the cause of an alarm it should be assumed that the
alarm is due to dangerous levels of carbon monoxide and the dwelling should be
evacuated.
Power light (green LED)
ALARM
FAULT
TEST /
– 23 –
Description of the device, Intended use
Alarm light (red LED)
Fault light (yellow LED)
Test / hush button
LCD Display
Sound outlet opening
GB