Ega Master 79907 Manuel D'instructions page 24

SAFETY INSTRUCTIONS FOR PREVENTION OF ACCESSORY HAZARDS
WARNING- Explosion hazard
When operating pneumatic impact wrenches in areas exposed to explosion hazards, only use
accessories, respectively devices, which are ATEX approved and specified.
INTENDED USE
The machine is designed for drilling into concrete and masonry. The machine is intended to be
used by professional operators. Only authorized and trained personnel may use, maintain and
repair the machine. The personnel has to be especially instructed on the potential dangers. The
working environment can be: construction site, factory, renovation, rebuilding and building.
Manipulation or modifications to the machine are not allowed. Observe the instructions regarding
the operation, care and maintenance in the operation instruction. Dangers can come from the
machines and the auxiliary materials, if improperly handled or used.
IMPROPER USE
Any use deviating from the intended use as described is considered to be improper use.
Working without personal protection equipment.
DANGER ZONES
Operational
condition
Life phase
Transport
Operation
Maintenance
24
Normal function
Transport of the
machine in an Drop of the machine
inoperable condition
Machine only works
without actuated
with actuated switch
Machine moves the
tool
Operation at a Breakdown of the
maintenance unit
USE
Malfunction Improper use
Transport of the
machine in an
operable condition
Machine runs
Switch is blocked in
actuated condition
switch
Tool blocks unknown
unknown
machine
Expected use
unknown
unknown
unknown
unknown