Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII Driver Diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C.
When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D.
Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
press any key to start
Please insert a floppy diskette into the floppy drive, and press any key.
E.
The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
If you want to enable Hot Plug function on eSATAII ports but you install
OS on IDE HDD, please skip step 2.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
your system.
After step 1, 2, 3, you can start to install Windows
64-bit OS on your system. At the beginning of Windows
third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette contain-
ing the NVIDIA
®
RAID driver. After reading the floppy disk, the driver will be presented.
Select the driver to install according to the mode you choose and the OS you install.
NOTE. If you install Windows
HDDs and want to manage (create, convert, delete, or rebuild) RAID functions
on SATA / SATAII HDDs, you still need to set up "SATA Operation Mode" to [RAID]
in BIOS first. Then, please set the RAID configuration by using the Windows RAID
installation guide in the following path in the Support CD:
.. \ RAID Installation Guide
3 2
3 2
3 2
3 2
3 2
ASRock
Advanced screen
®
2000 / Windows
®
XP / Windows
®
2000 / Windows
®
2000 / Windows
®
XP / Windows
ALiveN570SLI-eSATA2
Motherboard
IDE Configuration.
®
XP 64-bit OS on
®
®
XP / Windows
XP
®
setup, press F6 to install a
®
XP 64-bit on IDE
Publicité
Table des Matières
