ASROCK ALiveN570SLI-eSATA2 Manuel D'instructions page 15

2.5 SLI 2.5 SLI 2.5 SLI Operation Guide Operation Guide Operation Guide
2.5 SLI 2.5 SLI Operation Guide Operation Guide
TM TM TM TM TM
This motherboard supports NVIDIA
you to install two identical NVIDIA
cards. Currently, NVIDIA ® SLI
TM
and Vista 64-bit OS. Please follow the installation procedures in this section.
SLI TM Technology Requirements
1. You should have two identical SLI
certified.
2. Make sure that your graphics card driver supports the NVIDIA
technology. Download the latest driver from the NVIDIA
(www.nvidia.com).
3. Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
Enjoy the benefit of SLI Enjoy the benefit of SLI Enjoy the benefit of SLI
Enjoy the benefit of SLI Enjoy the benefit of SLI
Step 1. Install the identical SLI
cause different types of graphics cards will not work together properly. (Even
the GPU chips version shall be the same.) Insert one graphics card into PCIE2
slot and another graphics card to PCIE4 slot. Make sure that the cards are
properly seated on the slots.
Step2. If required, connect an auxiliary power source to the PCI Express graphics
cards.
Step3. Align and insert the SLI Bridge to the goldfingers on each graphics card. Make
sure that the SLI Bridge is firmly in place.
ASRock
® TM
SLI (Scalable Link Interface) technology that allows
® SLI TM enabled PCI Express x16 graphics
TM technology supports Windows
TM
-ready graphics cards that are NVIDIA
TM TM
TM TM TM
TM -ready graphics cards that are NVIDIA
ALiveN570SLI-eSATA2 Motherboard
® XP, XP 64-bit, Vista TM
®
® SLI TM
® website
® certified be-
1 5 1 5 1 5
1 5 1 5