ASROCK ALiveN570SLI-eSATA2 Manuel D'instructions page 24

ATX 12V Power Connector
(4-pin ATX12V1)
(see p.2, No. 3)
SLI/XFIRE Power Connector
(4-pin SLI/XFIRE_PWR1)
(see p.2 No. 36)
IEEE 1394 Header
(9-pin FRONT_1394)
(see p.2 No. 24)
HDMI_SPDIF Header
(3-pin HDMI_SPDIF1)
(see p.2, No. 27)
HDMI_SPDIF Cable
(Optional)
A. black end
2 4 2 4 2 4
2 4 2 4
ASRock
Please note that it is necessary
to connect a power supply with
ATX 12V plug to this connector.
Failing to do so will cause power
up failure.
It is not necessary to use this
connector, but please connect it
with a hard disk power connecor
when two graphics cards are
SLI/XFIRE_POWER1
plugged to this motherboard at
the same time.
Besides one default IEEE 1394
port on the I/O panel, there is one
IEEE 1394 header
(FRONT_1394) on this
motherboard. This IEEE 1394
header can support one IEEE
1394 port.
HDMI_SPDIF header, providing
SPDIF audio output to HDMI VGA
card, allows the system to
con nect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
Please connect the black end (A)
of HDMI_SPDIF cable to the
C
B HDMI_SPDIF header on the
motherboard. Then connect the
A
white end (B or C) of
HDMI_SPDIF cable to the
HDMI_SPDIF connector of HDMI
VGA card.
B. white end (2-pin)
ALiveN570SLI-eSATA2 Motherboard
C. white end (3-pin)