Installation Information; Safety Instructions - DURAVIT Darling New 21230105 Serie Notice De Montage

Important information
About these instructions
The installation instructions come as part of the Duravit
product and must be read carefully prior to installation.
Target readership and qualifications
This is a professional grade product. A working knowledge
of construction techniques and code compliant plumbing
installation are required for proper installation and user
satisfaction. The product must be installed by a licensed
plumber.
Explanation of the key words and symbols
WARNING
NOTICE
Link to installation information in this section
Link to other instructions
Inspection (e.g. for scratches)
Inspect for leaks and that all connections have a
watertight seal
Delivery contents
+
Accessories (not included)
> Action required

Safety instructions

Risk of personal injury or breakage through fragile
product!
> 2 people are recommended of handling.
> Handle with care.
4
MAL_57310/19.10.2
Allg_M_1pWC_wotext_57310_19_10_2.indb 4
Product and / or property damage
The breach of local and country-specific regulations
and standards can cause damage to the product and/or
property damage.
> Observe the local installation regulations and any
Prior to the installation
Please read specification sheets prior to the installation.
Specification sheets are available for download at
pro.duravit.us.
Water installation
Indicates a hazardous
situation which, if not
avoided, could result in
death or serious injury.
Single flush
Is used to address
Dual flush
practices not related to
physical injury.

Installation information

> For more details scan QR Code on packaging label.
1
7
8
country-specific standards at all times.
HET (high
efficiency toilet)
1.28 gpf / 4.8 lpf
1.32/0.92 gpf /
5.0/3.5 lpf
Inspection (Diagram 1)
> Inspect product for any potential damage that may
have occurred during transport.
> Do not install if any damage is visible.
Risk of external leaks! (Diagram 7)
NOTICE
Risk of external leaks!
> Do not lift or rock the toilet after placement.
> If you break the watertight seal, you must install a
new wax seal.
Risk of product damage! (Diagram 8)
NOTICE
Risk of product damage!
> Overtightening may cause breakage or chipping of
vitreous china.
> Handle with care.
Operation pressure
Recommended:
25 – 80 psi /
172 – 550 kPA
20 – 80 psi /
140 – 550 kPA
10.02.2020 16:11:39