Operation Of The Tool - Stinger ISANTA CN100B Mode D'emploi

IMPORTANT INFORMATION

OPERATION OF THE TOOL

• Never inspect, maintain, repair, adjust, clear a jam or store the tool with
the air connected.
• Never use the tool in proximity of flammable gases or liquids, as
some tools will create sparks that can be an ignition source for a fire or
explosion.
• Always inspect the safety device for damage and proper operation prior
to operation.
• Never assume the tool is empty of fasteners.
• Never point the tool toward yourself or any other persons.
• Never cycle the tool unless it is in contact with the work-piece.
• Never use the tool as a hammer or wedging device or drop to the floor
from any height.
• Always remove your finger from the trigger when pausing from cycling.
• Never tamper with the safety device or use the tool if the safety device
is not functioning properly.
• Use only STINGER® NailPac® 1" cap nails with the STINGER CN100B Cap
Nailer. Never use any fasteners that are not specified for use in this tool.
The CN100B holds 1 roll of plastic caps (200 caps) and 1 coil of nails (200
nails each).
3