Maintenance; Batteryinstallation - koban KMD-16 Mode D'emploi

KMD-16
TRMS Multimeter

7. Maintenance

WARNING:To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or
the battery or fuse covers.
WARNING:To avoid electric shock, do not operate your meter until the battery and fuse covers are in place and fastened
securely.
This MultiMeter is designed to provide years of dependable service, if the following care instructions are performed:
1. KEEP THE METER DRY. If it gets wet, wipe it off.
2. USE AND STORE THE METER IN NORMAL TEMPERATURES. Temperature extremes can shorten the life of the
electronic parts and distort or melt plastic parts.
3. HANDLE THE METER GENTLY AND CAREFULLY. Dropping it can damage the electronic parts or the case.
4. KEEP THE METER CLEAN. Wipe the case occasionally with a damp cloth. DO NOT use chemicals, cleaning
solvents, or detergents.
5. USE ONLY FRESH BATTERIES OF THE RECOMMENDED SIZE AND TYPE. Remove old or weak batteries so
they do not leak and damage the unit.
6. IF THE METER IS TO BE STORED FOR A LONG PERIOD OF TIME, the batteries should be removed to prevent
damage to the unit.

7.1 Batteryinstallation

WARNING:To avoid electric shock, disconnect the test leads from any source of voltage before removing the battery cover.
1. Turn power off and disconnect the test leads from the meter.
104 www.grupotemper.com