NewAge Products Bold 3.0 Serie Mode D'emploi page 8

Mounting the Worktop
Parts needed.
6 x Wood
Screw
(#8 x 5/8")
1 x #2 Phillips
Bit
Align worktop to the front, the back
2
or leave a 1in overhang on the front
and back
Side View
Option 1
Drill into the worktop using the #8 x
4
5/8" wood screws.
8
1 x Cordless
Power Drill
Option 2
www.newageproducts.com
Note: Please Ensure that casters are
locked in place before installing the
worktop
Remove the top 2 drawers and open
1
the doors. See page 8.
Place worktop on cabinet. Locate (6 )
punch holes on inside of cabinet.
3
Pre-drill 3mm (1/8") pilot holes in
worktop.
X2
5
Re-insert the 2 top drawers.
X2
X2