Technical Specifications; Symbols - Bestgreen BG 2525 Manuel D'utilisation

SYMBOLS

Maximum noise and vibration levels [1]
Measured sound pressure level at ear's operator
- Measurement uncertainty
Measured sound power level
– Measurement uncertainty
Garanteed sound power level
Vibrations level
– Front handle
– Rear handle
– Measurement uncertainty

TECHNICAL SPECIFICATIONS

Engine (2-stroke single cylinder) – displacement
Fuel (petrol/oil)
Power
Chain gauge
Idle RPM
Maximum admissible rpm without load with chain installed
Fuel tank capacity
Maximum power specific consumption
Oil tank capacity
Chain pinion teeth / pitch
Cutting length
Weight (with empty tank)
Maximum chain speed
Bar (Qirui)
Chain (Oregon)
Bar (Qirui)
Chain (Oregon)
Bar (Oregon)
Chain (Oregon)
Bar (Oregon)
Chain (Oregon)
Bar (Oregon)
Chain (Oregon)
Bar carving (Qirui)
Chain (Longer)
[1] WARNING! The vibration value may vary according to the usage of the machine and its fitted equipment, and be higher than
the one indicated. Safety measures must be established to protect the user and must be based on the load estimate generated
by the vibrations in real usage conditions. In this regard, all the operational cycle phases must be taken into consideration,
such as switching off or idle running.
2. SYMBOLS
All manuals and user guides at all-guides.com
dB(A)
dB(A)
dB(A)
dB(A)
dB(A
m/sec
m/sec
m/sec
cm
mm
1
1
cm
g/kWh
cm
mm
m/s
1) Warning! Read, understand and follow all
2) Warning! Danger of kickback.
3) Use the chain saw with two hands.
4) Read operator's instruction book before oper-
5) Wear head, eye and ear protection. If you are
6) Wear strong working gloves.
7) Wear boots or protective shoes with grippy
8) Use appropriate protections for foot-leg and
9) This saw is for trained tree service operators
2
2
2
CJ 300
25.4
3
% 40 = 2.5 %
kW 0.9
0.050" / 1.27 mm
/min < 3000 - 3500
/min 11000
200
3
560
140
3
6T / 3/8
220 / 270
kg 3.2
21
12" PO12-50SR
12" 91VG045X
12" PO12-50SR
12" 91P045X
12" 120SDEA041
12" 91P045X
10" 100SDEA041
10" 91P040X
10" 100SDEA041
10" 91PJ040X
10"
10"
warnings.
ating this machine.
using the machine every day in normal con-
ditions, you can be exposed to a noise level of
85 dB (A) or higher.
soles and steel toecaps.
hand-arm.
only (see Operator's Manual).
3
EN
89
3
105
5
110
5.8
12.1
1.5
CJ 300 C
25.4
40 = 2.5 %
0.9
0.050" / 1.27 mm
< 3000 - 3500
11000
200
560
140
8T / 1/4
235
3.2
18.6
AT10-50 QR
E1-25AP060T