Fripac Mondial K-4226 Notice D'emploi page 14

Operating instructions
Plug the mains cable of the device into the socket.
Press the ‚0/I' button. The temperature appears in the display and the
device heats up. You can monitor the progress of the heating process
with the aid of the temperature shown on the display.
The device has 10 temperature settings from 140 °C to 230 °C. The
preset temperature is 180 °C. Press the ‚+' button to increase the tem-
perature by 10 °C. Press the ‚-' button to reduce the temperature.
To save a temperature first select the desired temperature then press
the ‚M' button and hold it for 3 seconds. The temperature is now saved.
Briefly press the ‚M' button to switch from a different temperature to
the saved temperature.
To switch off the device press the ‚0/I' button and then unplug the
mains cable.
The styling iron will switch off automatically if it is not used for 30 mi-
nutes. This is a safety precaution. Nevertheless, always switch off and
unplug the styling iron when it is not being used.
EN - User Manual K-4226 - 13