Technische Daten - Lucky Reptile Humidity Control II Mode D'emploi

Important Information:
• The device saves settings in case of power loss for about 48 hours.
• In case of sensor error an alarm will sound and the display will show EEE. Contact your dealer.
• Do not undertake any modification and do not open the case.
• Device and sensor cords have to be checked always for signs of damage. If a defect is discovered the device has to be put out of operation immedi-
ately. The same applies if the device has come into contact with fluids.
• Generally it should be verified if the device is applicable for the application at hand before putting it into operation!
• In case of doubt consultation of experts or the manufacturer of the employed devices is required.
• In order to avoid animal losses regular checks of the humidity are required. Claims for losses due to malfunction of the controller cannot be
accepted.
Warranty
The warranty expires in case of modification and repair attempts as well as damaging by force or inappropriate usage.
A manufacturer warranty of 2 years is granted on this device. Repair, amendments or exchange for a replacement are at the manufacturer's discretion.
Neither a guarantee nor any liabilities for detriments or consequential damages in relation with this product will be assumed.
In case of warranty claims or repairs contact your specialist dealer.

Technische Daten

Voltage:
Maximum Load:
Power Consumption:
Humidity Setting:
Humidity Range:
Accuracy:
Resolution:
Temp. Difference for Switching:
Alarm when exceeding temp:
3.
230 V~ 50/60 Hz
1000 W
< 5W
0 % to 99 %
0 % to 99 %
+- 5 %
1 %
1 % - 50 %
+- 0 % to 50 %