Maintenance And Cleaning; Technical Data - Beper 90.002 Mode D'emploi

Thermoelectric refrigerator Use instructions
FUNCTION
Plug the power cord into the electrical outlet.
Set the temperature by turning the adjusting knob placed inside the fridge.
The temperature cab be set in the range of 5 ° C to 15 ° C.
To reduce the internal temperature, rotate the knob from "Min" to "Max".
At first use, set the knob to "Max" to reduce the temperature more quickly, then adjust it to your liking.
The temperature reaches the set value at varying times depending on the room temperature and the amount of
food introduced into the refrigerator and the temperature of the refrigerator.
The best performance is obtained if the door is opened and closed as little as possible.
For optimal results, it is recommended to put in the refrigerator food and drinks already cold.

MAINTENANCE AND CLEANING

Disconnect the power cord from the electrical outlet before each cleaning operation.
Be careful not to infiltrate liquids in the fridge, to avoid damaging it.
Never clean with diluents, abrasive products in general, detergents for plastic, glass or the like because could
damage the fridge.
The inside of the fridge can be cleaned with a solution of hot water and bicarbonate (2 tablespoons of bicarbo-
nate in a quarter of a liter of water). Dry all parts well.
Be careful not to wet the temperature control knob and the fan guard grid.
The outside of the fridge, shelf grids and gasket can be cleaned with a damp cloth and soap.
Periodically dry the condensed liquid in the condensate collection tray.
When not using the fridge for a long time, remove any food and drink inside the compartment, clean it and leave
the front door open for a few days.
It is important to ensure good ventilation around the fridge in order to avoid mold formation.
To change the position of the fridge, empty it completely and then move it, without tilting it over or overturning it.

TECHNICAL DATA

Power: 70W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
12