Before You Start - Elinchrom ELC Pro HD 500 Manuel D'utilisation

BEFORE YOU START!

BASIC FEATURES
• Robust ire retardant body shell
• Improved rubberised handle
• Precise control knob
• Smart OLED display
• 3.5mm synchronisation socket
• Integrated EL-Skyport receiver
• 300 W Halogen modelling lamp
• Eficient low noise fan cooling
ADVANCED PROGRAMMABLE FEATURES
• Photocell on/off
• Pre-lash option for perfect synchronization with speedlites
• EL-Skyport wireless triggering & remote control
• Optimised recycle time
• Energy saving options
• Sequence mode
• Delayed mode
• Strobo mode up to 20 lashes per second
• Customisation of the charge ready beep status
• Unit statistics
• Visual Flash Control (VFC)
• User Presets
MAINS SUPPLY
Use only Elinchrom mains cord.
MAINS FUSE
Standard type 5x20mm, use only fast acting F10AH
(code 19038) for ELC.
Note: Remove the mains cable before exchanging a
blown fuse. Open the little drawer in the mains plug with
a screwdriver and replace the fuse with the spare fuse,
which is placed in its support in this drawer. (N.B. Please
don't forget to check the correct rating of the fuse!).
User Manual
EN
7