Package Contents; Assembly And Adjustment - DeWalt DE6256 Guide D'assemblage

E N G L I S H
Safety instructions
Observe the safety regulations in the instruction
manual of the Power Tool to be connected to
this attachment. Also observe any applicable
additional safety rules. Read the following safety
instructions before attempting to operate this
product. Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Keep children away
Do not let children come into contact with the
tool or its attachments. Keep all people away
from the work area.
3 Dress properly
Do not wear loose clothing or jewellery. They can
be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
4 Wear safety goggles
Also use a face or dust mask in case the
operations produce dust or flying particles.
5 Beware of maximum sound pressure
Take appropriate measures for the protection of
hearing if the sound pressure of 85 dB(A) is
exceeded.
6 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
7 Use appropriate tool
The intended use is laid down in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended.
Warning! The use of any accessory or
attachment or performance of any operation with
this tool, other than those recommended in this
instruction manual may present a risk of personal
injury.
8 Have your Power Tool Attachment repaired
by an authorized D
Repair of your Power Tool Attachment being a
matter of precision and skill, always take it to
your D WALT Authorized Repair Agent.
E
en - 2
WALT repair agent
E

Package contents

The package contains:
1 Dowelling template
1 Guide bush 14 mm for DW613, Elu MOF96(E)
1 Guide bush 14 mm for DW620, DW621, DW625,
DW626, Elu MOF177(E)
2 M5 screws
2 M6 screws
1 Locating pin 6 mm
1 Locating pin 8 mm
1 Locating pin 10 mm
2 Plastic cams
2 Tommy bars
2 Spring-loaded anchor assemblies
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description
The dowelling template DE6256 allows you to make
professional dowel joints using your DE6252
dovetailing attachment and DW613, DW620,
DW621, Elu MOF96(E) or Elu MOF177(E) router.

Assembly and adjustment

Also refer to your router manual.
Preparing the dovetailing attachment
• Prepare the dovetailing attachment as described
in the DE6252 manual.
Adjusting the template bolts (fig. C1 - C6)
The template is held in place with two threaded bolts
(2). If the bolts do not fit correctly into the lugs on the
attachment, adjust as follows:
• Slacken the nuts (6) using a spanner (7).
• Place the template onto the attachment. Make
sure that the adjustment bushes (3) are in front of
the lugs (10) and the star knobs (1) behind the
lugs. Insert the bolts correctly into the slots (9).
• Tighten the star knobs (1).
• Securely tighten the nuts (6).
12