Battery Charging - CONTINENTAL EDISON CEVCBSFPB Manuel D'instructions

BATTERY CHARGING

Warning: Do not use any chargers other than the one
supplied. All repairs or battery replacement should be
performed by an authorized technical service. Before
the first use, it is important to charge the batteries
completely. This charge will take approximately 4
hours.
1. Attach the charging support piece to the charging
support base.
2. Hang the appliance onto the vacuum body hook of
the charging base. Make sure the appliance fits
steadily on the base.
3. Plug the charger into the charging base first, and
then into the mains socket.
4. Charge the batteries at room temperature between
4 and 40℃.
5. While charging, the pilot light will be flashing to
indicate the charger is under working. When the
charging operation is finished, the charger will
switch off automatically and the pilot lights will be
on instead of flashing.
6. After charging, unplug the charger from the mains
socket and the appliance. Do not use the appliance
while it is connected to the charger. Store the
charger in a safe place for future charges. The
appliance is now ready for use.