GPO Rydell Radio Mode D'emploi page 9

AUTO SCAN/ENTER to confirm
3. In Main menu. Use the UP/DOWN button to select time setup and
short Press the AUTO SCAN/ENTER to confirm.
p,
4. In Time setup menu , Use the UP/DOWN button to select Auto
update and short press the AUTO SCAN/ENTER to confirm
5. In Auto update menu, use the UP/DOWN button to select from radio.
ALARM 1 SETTINGS
1. In FM or DAB mode, Press the SLEEP/SNOOZE/ALARM button until
the Alarms menu is shown.
2. Press the UP/DOWN button to select alarm1 and short Press AUTO
SCAN/ENTER to confirm
3. In alarm detail menu. Use the UP/DOWN button to select time and
short Press the AUTO SCAN/ENTER button to confirm.
4. The hour begin to flash and you can press UP/DOWN button to set.
.
Press the AUTO SCAN/ENTER to confirm.
5. The minute flashes and can now be set, and then short Press AUTO
SCAN/ENTER button to confirm.
6. Back to alarm detail menu. Use the UP/DOWN button to select save
and press the AUTO SCAN/ENTER to make the alarm setting is
k
active.
Note: turn on the alarm1 function in the alarm detail menu.
m.
ALARM 2 SETTINGS
TO
1. In FM or DAB mode, Press the SLEEP/SNOOZE/ALARM button until
the Alarms menu is shown.
2. Press the UP/DOWN button to select alarm2 and short Press AUTO
SCAN/ENTER to confirm
3. In alarm detail menu. Use the UP/DOWN button to select time and
short Press the AUTO SCAN/ENTER button to confirm.
4. The hour begin to flash and you can press UP/DOWN button to set.
Press the AUTO SCAN/ENTER to confirm.
5. The minute flashes and can now be set, and then short Press AUTO
GPO_Rydell_DAB_EU_Manual_JSEPT_2021_V3.indd 9 GPO_Rydell_DAB_EU_Manual_JSEPT_2021_V3.indd 9
9
30/09/2021 14:18 30/09/2021 14:18