Memory Recall - GPO Rydell Radio Mode D'emploi

Preset 1 to Preset 10
ed Remarks: A stored frequency can only be erased by storing another
frequency in its place.
The unit can be preset up to 10 stations.

MEMORY RECALL

Recall the stored frequencies
1) Short press PRESET button, then press DOWN/UP button to change
the number where the station has been stored. (Preset 1 to Preset 10)
2) Short press AUTO SCAN /ENTER button again to confirm.
INFO Button
A. The UNIT has DAB information modes which are shown on the
e bottom line of the display.
Short Press
the INFO key to see the available types.
1. program type
Displays the type of station content being broadcast e.g. Classic, Pop,
News, etc. 2.Ensemble Freq.
AUTO Displays the DAB station frequency such as 13F 239.200MHz.
play 3. Audio Bit Rate Displays the data rate in kilo Bits per second and the
audio mode e.g. Stereo.
M 4. Ensemble name Displays the name of the multiplex to which the
Digital1 Network current station belongs
5. Signal strength Displays the signal strength for the station being
listened to.
dure. 6. Time/Date Displays current time and date, received off-air.
hen 7. DLS (Dynamic Link Segment) Scrolling text which includes
will messages such as Artist and track name, phone numbers, program
details, etc.
The UNIT has six FM information modes which are shown on the
bottom line of the display.
GPO_Rydell_DAB_EU_Manual_JSEPT_2021_V3.indd 7 GPO_Rydell_DAB_EU_Manual_JSEPT_2021_V3.indd 7
7
30/09/2021 14:18 30/09/2021 14:18