Service Information - Wavetek Meterman CT-235 Manuel D'utilisation

BATTERY COVER
BATTERIEFACHDECKEL
COUVERCLE, COMP.
PILE
ZERO ADJUST
NULLABGLEICH
AJUSTAGE DU
ZERO
LED
Fig. 1

6. SERVICE INFORMATION

Read the warranty located at the front of this manual before requesting warranty
or non-warranty repairs. For warranty repairs, any multimeter claimed to be
defective can be returned to any Wavetek Meterman authorized distributor or to
a Wavetek Meterman Service Center for an over-the-counter exchange for the
same or like product. Non-warranty repairs should be sent to a Wavetek
Meterman Service Center. Please call Wavetek Meterman or enquire at your
point of purchase for the nearest location and current repair rates. All
multimeters returned for warranty or non-warranty repair or for calibration
should be accompanied by the following information or items: company name,
customer's name, address, telephone number, proof of purchase (warranty
repairs), a brief description of the problem or the service requested, and the
appropriate service charge (for non-warranty repairs). Please include the test
leads with the meter. Service charges should be remitted in the form of a check,
a money order, credit card with expiration date, or a purchase order made
payable to Wavetek Meterman or to the specific service center. For minimum
turn-around time on out-of-warranty repairs please phone in advance for
service charge rates. The clamp should be shipped with transportation charges
prepaid to one of the following addresses or to a service center:
JAWS
ZANGE
PINCE
ZERO
ADJUST
OFF 20A 200A
CT237
ON
AC/DC CURRENT PROBE
OUTPUT: 10mV/A 1mV/A
MAX CURRENT: 200A RMS
BATTERY COVER SCREW (CAPTIVE)
SCHRAUBE, BATTERIEFACH
VIS, COMPARTIMENT PILE
PROTECTIVE BARRIER
SCHUTZSPERRE
BOUCLIER DE
PROTECTION
ON/OFF SWITCH
EIN/AUS SCHALTER
BOUTON MARCHE/
ARRET