SYSTEM TROUBLESHOOTING
If you follow the recommended action but the problem
persists, or error messages other than the ones below appear,
please call your local customer service. Do not attempt to
repair by yourself and never try to disassemble the monitor
under any circumstances.
Error Messages
MESSAGE
CAUSE
Inflation or
E-1
pressure error.
Blood pressure
E-4
measurement error.
E-b
Batteries are dead.
E-A
Problems with the
meter.
E-E
WHAT TO DO
Please contact local
customer service for help.
Refit cuff tightly and
correctly.
Relax and repeat the
measurement. If error still
remains, contact local
customer service for help.
Replace the batteries.
Review the instructions and
repeat the test. If the meter
still does not work, please
contact the local customer
service for help.
Troubleshooting
1. If no display appears after pressing
POSSIBLE CAUSE
Batteries exhausted.
Batteries incorrectly
installed or absent.
2. If the heart rate is higher/lower than user's average:
POSSIBLE CAUSE
Movement during
measurement.
Batteries incorrectly
installed or absent.
3. If the result is higher/lower than the user's average
measurement:
POSSIBLE CAUSE
User may not be in the
correct position while
measuring.
Blood pressure naturally
varies from time to time.
EN-9
:
WHAT TO DO
Replace the batteries.
Check if the batteries are correctly
installed.
WHAT TO DO
Repeat the measurement.
Rest at least 30 minutes before
repeating the measurement.
WHAT TO DO
Adjust to the correct position for
measurement.
Keep in mind for the next
measurement.