cecotec DRESSCODE 8600 INVERTER Manuel D'instructions page 30

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
ENGLISH
QuickStart
Before washing
Plug the appliance to a power supply.
Open the tap.
Load.
Close the door.
Add detergent.
Fig. 13.
Note: Detergent must be added in "case I" only after selecting pre-washing for machines with
this function.
Washing
Turn the device on.
Turn the knob to select the desired programme.
Select function or use the default one.
Press Start.
Fig. 14.
Note: If any of the default options is selected, step 3 can be skipped.
After washing
The appliance will beep, or the display will show "End".
Using the washing machine
Before each washing
The washing machine should be operated within a temperature range of 0-40 °C. If used under
0°C, the inlet valve and draining system may be damaged. If the machine is placed or operated
in rooms at 0 °C or below, it should be transferred to normal ambient temperature to ensure
the water supply hose and drain hose are not frozen before use.
Check the labels and the product instructions when using detergent before washing. Use
non-foaming or less-foaming detergent suitable for machine washing.
Check the label. Fig. 15.
Empty the pockets of the clothes to be washed. Fig. 16.
Knot the long strips, close zips or tighten button. Fig. 17.
Put small clothes inside a pillow slip. Fig. 18.
Turn easy-pilling and long-pile fabrics inside out. Fig. 19.
Separate clothes with different textures. Fig. 20.
Detergent dispenser
Fig. 21.
Pull out the dispenser to open it.
58
Pres-wash detergent
Main wash detergent
Softener
Means must
Means optional
Note: When using agglomerated, ropy detergent or additives, before they are poured into the
detergent box, it is suggested to use some water for dilution to prevent the inlet of detergent
box from being blocked and overflowing while filling water.
Use a suitable type of detergent for the various washing temperatures to get the best washing
performance with less water and energy consumption.
Control panel
Fig. 22.
On/off (1)
press the On/off button to turn the device on and off.
Start/Pause (2)
Press the button to start or pause the washing cycle.
Option (3)
Select an additional function, the light indicator will light when selected.
Programmes (4)
Different types of programmes for different types of laundry.
BOLERO DRESSCODE_8600 INVERTER / 9600 INVERTER / 9600 INVERTER STEEL / 12600 INVERTER
ENGLISH
59

Publicité

Table des Matières
loading

Table des Matières