Installation; Mounting Options - AquaScape 84031 Instructions D'installation

Model
Dimensions
Material
Voltage Min-Max
Wattage
Lumens
Kelvin Temperature
Color Rendering Index
Beam Angle Spread
Cord Length

Installation

MOUNTING OPTIONS

• Choose the option that works best for each light.
– Removable mounting stand (#84031, #84033, and #84034 only)
 Remove the threaded nut from the fi xture holder and insert holder
into the base. Use the threaded nut to secure the fi xture holder
(Ex. 1).
– Landscape stake (#84031, #84033, and #84034 only)
 Remove the threaded nut from the fi xture holder and thread the
stake clockwise into the bottom of the fi xture holder (Ex. 2).
– No stand or stake
 The lights can be used
without the fi xture holder
to allow the fi xture to be
disguised between rocks
(Ex. 3).
– Adjusting the light angle
 To adjust the angle, push
up or down on the fi xture
holder until it "clicks" into the
desired position (Ex. 4).
2
Garden and Pond LED Lighting Specs
1-Watt LED Waterfall and Up Light
2" diameter x 1.25"H
Die-Cast Metal
9V-15V
1.2±10%
45 lm
3,000 K
75
30°
14.5'
Ex. 1
1-Watt LED Spotlight
1.5" diameter x 2"H
Die-Cast Metal
9V-15V
1.2±10%
45 lm
3,000 K
75
30°
14.5'
– Waterfall and Up Light Base
(#84032 only)
 The pre-installed stand can
be removed for installation in
tight spaces (Ex. 5).
CONNECT LIGHT FIXTURES
• Aquascape Garden and Pond lights include 2-pin, quick-connect fi ttings
to provide tool-free electrical connections.
WARNING: Do not cut
or remove the isolation
chamber, as it will damage
the light and void the warranty
(Ex. 6).
Ex. 2
• Splitters and extension cables are available to install multiple lights. See
the recommended products section for available extensions and splitters.
• Connect lights to Garden and
Pond quick-connect splitters and
extensions (Ex. 7).
NOTE: Quick-connect
Ex. 3
connections must be fully
tightened to prevent water
from entering. Dielectric
grease, available at most home
improvement stores, can be
used in all connections to further
prevent water infi ltration.
• If desired, the Aquascape Garden and Pond Photocell with Digital Timer
can be installed at this time. See the recommended products section for
more information).
Ex. 4
WARNING: Do not submerge quick-connect fi ttings, as
moisture entering the connections will damage the lights.
3-Watt LED Spotlight 6-Watt LED Spotlight
3" diameter x 3"H 3" diameter x 3"H
Die-Cast Metal Die-Cast Metal
9V-15V
3±10% 5.8±10%
150 lm
3,000 K
75
30°
14.5'
9V-15V
340 lm
3,000 K
75
30°
14.5'
Ex. 5
Ex. 6
Ex. 7