Video Output - Guide TRACK IR 25 mm Guide De Démarrage Rapide

DE IT GB FR
imager, insert the matching Type C USB charging cable, and plug in the
power, and then the charging begins.
Charging specifications: 5V, 2A.
Charging indicator is red during normal charging.
Charging indicator is green when charging is complete.
Note: Charging when power on.
It means that the external power supply is supplying power to the
device to ensure normal operation, but is not charging the battery.
It means that the external power supply is also charging the
battery while powering the device to ensure normal operation.

Video output

There is a video output port beside the USB interface on the side of the
thermal imager, and the external video is always in the state of power
on.
The image of the thermal imager can be output to the external screen
through the matching HDMI video cable. There are two display modes,
namely the external screen and the screen of the device, but only one
mode can be selected!
Note: When HDMI is used to connect the external display screen, the
real-time screen can only be viewed by the external display. There is
no screen display on the screen of this device. When the HDMI cable is
unplugged, the screen of the device is restored.
35