FOREVER MLP-110 Mode D'emploi page 5

Picture files: PG, BMP, JPEG, PNG
Text files: PDF, WORD, EXCEL, PPT, TXT
Names of parts
I Projector
1. Lens
2. MENU key
3. Signal selection key
4. Arrow keys
5. OK key
6. Return key
7. On/Off switch
8. Keystone effect correction
9. Focus setting
10. Power input
11. External SD memory card slot
12. USB output 5 V 500 mA
13. USB port
14. HDMI slot
15. AV input
16. Audio output
II. Remote
1. On/Off switch
2.Menu key - access to application options
3. Arrow keys „+" confirm OK key
4. Volume control (up/down)
5.Properties key
6.Signal source selection (AV/HDMI/SD)
7.Muting
8. Exit key - application exit
9. Multimedia control
Start-up and correct set-up
The projector enables obtaining images in sizes from 30 to 120 inches. The image size depends
on the distance of the projector from the plane of the displayed image.
Start-up and set-up sequence:
- Connect the power cable to the mains socket.
- Other end of the power cable must be connected to the power input in the projector.
- Start-up the projector using the on/off switch on the projector or the remote control.
- Place the projector in the correct distance to obtain the expected diagonal screen size.
- Adjust the image focus using the knob on the projector's object lens. To obtain the lowest
possible diagonal size, adjust the knob all the way to the right. To obtain the highest possible
diagonal size, adjust the knob all the way to the left. When encountering resistance, do not
turn the knob using force due to the risk of damaging it.
- If necessary, adjust the keystone effect using the second knob aside from the focus adjust-
ment. Ultimately, the obtained image will have a rectangular shape instead of a trapezoid.
EN
5