FOREVER MLP-110 Mode D'emploi page 12

Changing the language in the operating system
EN
As standard, the device is started up with in the English language.
1. Click the "System Setting" icon on the start-up screen.
2. Enter the "Language & input" tab.
3. Enter the Language tab.
4. Select the required language.
5. Confirm using the "OK" key.
6. To exit the settings, click EXIT on the remote control or Back on the projector.
Factory reset
In case of encountering problems with the device or wanting to restore the default settings in
the projector, it is possible to execute a FACTORY RESET.
1. Click the "System Setting" icon on the start-up screen.
2. Enter the "Data backup and deleting" tab.
3. Enter the "Default settings" tab. Now, depending on the requirements, it is possible to empty
the SD card, aside from the system data.
4. After selection, click "Reset the phone". A warning box will be displayed.
5. Confirm the execution of the factory reset. Click "Reset all".
The projector will shut down. When attempting start-up, the projector will delete the data
and then shut down. The next projector start-up will take slightly longer and after launching
the start-up screen, the device will restore the default settings present when the device was
unpacked.
USB OTG
The projector supports the OTG technology. Thanks to this, it is possible to use the USB slots
to plug in devices which will be identified by the system and installed in the Plug & Play mode. A
good example is the support for a keyboard and mouse after plugging them into the USB port.
This facilitates using the device.
Safety regulations
- Prevent eye exposure to direct radiation from the projector.
- The device requires good ventilation for correct and safe operation. Do not enclose or cover
the device.
- The projector must be used away from flammable materials.
- The maximum time of continuous operation is 12 hours in room teperature. After that time,
it is recommended to shut down the device to allow cooling. Compliance with the above
principle will help to substantially prolong the lifetime of the projector's backlighting.
Due to the update of the system for a newer one, some functions and layout may be slightly
different from the one included in the instruction manual.
TelForceOne S.A. declares that the product is compatible with requirements and other re-
levant provisions of the 2014/53/UE directive. You can download the declarationon of product
on website www.telforceone.pl.
12