iNSTALLATiON iNSTRUCTiONS FOR iNSTALLiNG A CAST SURROUND kiT AND DECORATiVE kEYSTONE kiT
FOR USE WiTH LADERA™ AND BiS
SURROUND kiT CONTENTS
1 ea. Right Side Surround Panel
1 ea. Left Side Surround Panel
1 ea. Upper Surround Panel
1 ea. Lower Surround Panel
8 ea. 10-32 x 1/2" Screws
1 ea. Instruction Sheet
CAST SURROUND kiTS
Cat. No.
Model
H7303
CSk
Cast Surround kit
H7757
CSk-Dk
Cast Surround Decorative keystone
Figure 1 - Surround Kits
GENERAL iNFORMATiON
This cast-iron surround kit provides attractive panels to give your fireplace
a finished look by covering the fireplace opening around the appliance.
If you encounter any problems, need clarification of these instructions or
are not qualified to properly install this kit, contact your local distributor
or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL WARNiNGS AND PRECAUTiONS iN THE iNSTALLATiON AND
OPERATiON MANUAL PROViDED WiTH THE APPLiANCE APPLY TO
THESE iNSTRUCTiONS.
SHUT DOWN THE APPLiANCE AND ALLOW iT TO COMPLETELY COOL
BEFORE PROCEEDiNG.
NOVA WOOD-BURNiNG FiREPLACES
®
kEYSTONE kiT CONTENTS
1 ea. Keystone
3 ea. 10-32 x 1/2" Screws
Description
NOTE: DiAGRAMS & iLLUSTRATiONS ARE NOT TO SCALE.
P/N F160
Rev. A, 07/2013
SPECiFiCATiONS
Surround With keystone
35"
(889mm)
Surround Without keystone
35"
(889mm)
Figure 2 - Specifications
HEARTH PRODUCTS
KITS AND ACCESSORIES
CAST SURROUND kiTS
36-1/8"
(918mm)
39-1/4"
(997mm)
39-1/4"
(997mm)
1