Transport; Handling And Lifting - Timken ROLLON E-SMART 30 Mode D'emploi

Transport

Transport, also based on the final destination, can be done with
■
different vehicles.
Perform transport with suitable devices that have adequate
■
loading capacity.
Ensure that the machine and its components are adequately
■
anchored to the vehicle.

Handling and lifting

Correctly connect the lifting devices to the established points
■
on the packages and/or on the dismantled parts.
Before handling, read the instructions, especially safety
■
instructions, provided in the installation manual, on the packa-
ges and/or on the dismantled parts.
DO NOT attempt, in any way, to bypass handling methods and
■
the established lifting, moving and handling points of each
package and/or dismantled part.
Slowly lift the package to the minimum necessary height and
■
move it with the utmost caution to avoid dangerous oscilla-
tions.
DO NOT perform handling with an inadequate visual field and
■
when there are obstacles along the route to reach the final
location.
DO NOT allow people to either transit or linger within the range
■
of action when lifting and handling loads.
Do not stack packages to avoid damaging them, and reduce
■
the risk of sudden and dangerous movements.
In case of prolonged storage, regularly ensure that there are no
■
variations in the storage conditions of the packages.
Check axis integrity after shipment
Every shipment is accompanied by a document ("Packing list"
with the list and description of the axes.
Upon receipt check that the material received corresponds to
■
specifications in the delivery note.
Check that packaging is perfectly intact and, for shipments
■
without packaging, check that each axis is intact.
In case of damages or missing parts, contact the manufacturer
■
to define the relevant procedures.
Smart System
UM-9