REDATOM REDLC125 Manuel D'instructions page 11

STEP 6 - SECURE MONITOR PLATE TO ARM ASSEMBY
B
STEP 7 - ADJUST TILT TENSION/ POST INSTALLATION LEVEL
Adjust tilt mechanism tension with ratchet handle
levers (follow steps A-C with both handles)
A3
A4
a) Rotate handle
clockwise as far
as possible.
b) Pull handle to
side laterally
(against spring
tension) and
rotate count-
er-clockwise as
far as possible.
c) Repeat steps a)
and b) until TV
holds desired tilt.
A2
Built-in level feature for post installation
correction
±3°
Adjust the 2 acorn nuts to snug, not
tight, tension. Slots allow Monitor Plate
and TV to move 3˚ in either direction.
Secure Acorn Nut
and Washer on
Monitor Plate to
Arm Assembly
Allen Wrench
A2
A3
M6 Washer
A4
M6 Acorn Nut