How To Use The Advanced Functions
SLEEP Function
The SLEEP function is used to decrease
energy use while you sleep (and don t need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
Note: The SLEEP function is not available
in FAN or DRY mode.
TURBO function
The TURBO function makes the unit work
extra hard to reach your present temperature
in the shortest amount of time possible.
When you press the TURBO button in
COOL mode, the unit will blow cool air
with strongest wind setting to jump-start
the cooling process.
When you press the TURBO button in
HEAT mode, for units with Electric heat
elements, the Electric Heater will activate
and jump-start the heating process.
SELF CLEAN function
Airborne bacteria can grow in the
moisture that condenses around heat
exchangers in the unit. With regular use,
most of this moisture is evaporated from
the unit. By pressing the SELF CLEAN
button, your unit will clean itself automa-
tically. After that, the unit will turn off
automatically. Pressing the SELF CLEAN
button mid-cycle will cancel the operation
and turn off the unit.
You can use SELF CLEAN as often as
you like.
Note: You can only activate this function
in COOL or DRY mode.
SHORTCUT function
Used to restore the current settings or
,
resume previous settings.
Push this button when remote controller is
on, the system will automatically revert
back to the previous settings including
operating mode, setting temperature, fan
speed level and sleep feature (if activated).
If pushing more than 2 seconds, the
system will automatically restore the
current operation settings including
operating mode, setting temperature, fan
speed level and sleep feature(if activated ).
Model: RG57A1(B)/BGEF, RG57B(B)/BGE, RG57K7(B)/BGEF
NOTE: CLEAN and FOLLOW buttons are
not available for Model RG57B(B)/BGE,
DIRECT button is not available for Model
RG57K7(B)/BGEF.
ON/OFF
SHORT
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SLEEP
SWING
DIRECT
LED
TURBO
CLEAN
FOLLOW
Page 14