Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ICE FULL and
ADD WATER
indicators light up
simultaneously.
The ICE FULL indicator
light is on.
The unit does not
operate.
Ice blockage. No ice is
being made.
The ice-making cycle
seems normal but no ice
is produced.
Electrical power surge.
Air in the lines or the
lines are blocked. The
water tank cannot detect
water level.
The ice basket is full.
Power is not being
supplied to the unit.
The ambient temperature
or the water temperature
is too high.
Making ice takes too
much time.
There is refrigerant
leakage. A pipe in the
cooling system is blocked.
7
Turn off ice maker, unplug
from electrical outlet, refill
water if required, replace
the plug, then restart the
unit.
Inspect relative parts.
Remove the drain cap on
the back of the unit and
drain out a small amount
of water. Replace cap and
restart ice maker.
Check if ice is blocking the
ice pusher. Turn off the ice
maker, let the ice melt,
then restart.
Remove ice from the ice
storage basket to make
more.
Plug the unit into a
standard 110/120 V
60 Hz, power source.
Please run the ice maker
in temperatures below
32°C (90°F) and/or pour
colder water into the water
reservoir.
Turn off the machine.
Start the machine after
the ice block melts. Or
change the size selector
to small ice cubes.
Consult a qualified
technician or call
customer service.
Publicité
Table des Matières
