Troubleshooting - Klarstein QUICK COOK Mode D'emploi

TROUBLESHOOTING

Problem
The lid is difficult to
close.
The lid is difficult to
open.
Steam comes out of
the lid.
Steam comes out of the
float valve.
Possible Cause
The big seal ring (17)
has not been installed
properly.
The pot is still under
pressure.
The big seal ring (17) is
uninstalled.
The big seal ring (17) is
dirty and therefore does
not seal completely.
The lid is unlocked.
The seal ring of the float
valve (15) is dirty.
Solution
Make sure that the big
seal ring is properly
seated and held in place
by the metal ring on the
underside of the lid.
Use the Quick Pressure
Release method to
release the pressure
remaining in the pot.
Make sure the float valve
(3) is in the low position
before attempting to
open the lid.
Install the big seal ring
(17).
Clean the big seal ring
(17).
Lock the lid.
Clean the seal ring of
the float valve (15). It is
located around the float
valve on the underside
of the lid.
EN
37