Tools Required; Spare Parts - GRAUPNER Hilti Monster Truck Manuel D'utilisation

SERVICE
You should always try to keep your vehicle in order to prevent wear. If there is dirt in moving parts, this can
affect the performance of the model signifi cantly. Remove dirt or dust with compressed air, a soft brush and/or
with a toothbrush. If possible, try using no solvents, as this can move the dirt in normally inaccessible places
and thus cause additional wear. We recommend the following simple procedures:
• Remove dirt and dust as far as possible with the methods described above.
• Check the car on worn, broken or gripping parts and repair them if necessary.
• Check regularly the fi xed seating of all screws and tighten them if necessary.

TOOLS REQUIRED

• Allen key 1.5, 2 und 2.5mm (order-no. 5775.1,5; 5775.2 and 5775.2,5 or 5774)
• 5.5 und 7mm wrench (order-no. 5783.5,5 and 5783.7,0)
• 17mm Wheel nut wrench (order-no. 98004)
• small needle-nosed pliers
Needle-nosed pliers
SERVICE AND REPAIR, SPARE PARTS
For the Hilti Monster Truck all parts are available as spare parts. So if a part is defective or worn, you can
order these parts at the Graupner spare part shop and fi x the car yourself with the help of the assembly
instruction (pages 22 to 29). If you think you can't do this by yourself, you can send the vehicle also to the
Graupner service department to have your car repaired. Please note, that thereby costs arise.
In problem cases, or for questions and repairs, please contact the Service department in your coun-
try (see warranty card on page 31) or:
GRAUPNER-Service, Henriettenstrasse 94-96, D-73230 Kirchheim/Teck,
Tel. +49/1805/472876
SPARE PARTS: online at Graupner Spare-parts Shop http://www.graupner-ersatzteilshop.de/ under order.-
nr.: 90165.RTR
SPECIFICATIONS
Lenght:
Width:
Height (chassis):
Tyre Diameter/Widht:
Weight (RTR):
Battery:
Motor:
Radio System:
11
All manuals and user guides at all-guides.com
Wheel nut wrench
488 mm
325 mm
220 mm
126x70 mm
ca. 2850 g
HILTI Li-Ion B 144 2.6
Speed 600 H (12V)
GM-Racing XG-6 3-Channel 40Mhz FM
Allen key 1.5, 2, 2.5mm
Wrench 5.5mm, 7mm
90165.RTR Hilti Monster Truck 4WD